Reducing infection risks through
effective virus protection

What are viruses?

Viruses are organic structures that spread as virus particles, known as ‘virions’, and usually have a diameter of 0.015 μm to 0.4 μm (μm = micrometer). One micrometer corresponds to a thousandth of a millimeter. Viruses are therefore very small and allocated to the PM1 category. The classification of particles into the categories PM10, PM2.5 and PM1 is based on the "National Air Quality Standard for Particulate Matter" of the US Environmental Protection Agency (EPA) and is accepted and used worldwide. This classification plays a particularly important role in air filtration, as the size of the particles to be filtered is important in mechanical filtration. The choice of right filter is decisive here.

Virus size comparison

They do not themselves consist of cells and can only reproduce with the help of other cells. For this reason, they are fundamentally dependent on living organisms as hosts. Like bacteria, parasites and fungi, viruses belong to the category of pathogens and cause health-damaging conditions in their hosts.

Pathogens compared: viruses, bacteria and parasites
In contrast to viruses, bacteria are unicellular organisms and can multiply via cell division. Parasites also consist of cells. However, like viruses, they exploit the metabolic processes of a host to reproduce themselves.

Familiar viruses at a glance


Transmission path: Droplet and contact infection
The Covid-19 (Corona) virus can cause diseases ranging from a normal cold to severe disease progression.
The WHO has declared the outbreak of this virus to be a health emergency of international concern.

Learn more

Viruses – influenza


Transmission path: droplet and contact infection

“Standard” flu is one of the most common viral infections. The World Health Organization (WHO) estimates that between 10-20% of the world's population is affected every year.

Viruses – measles virus

Measles virus

Transmission path: Droplet infection

Measles is regarded as a typical childhood disease. Transmission is prevented by vaccines. Cases of infection are still widespread in Africa.

Viruses – ebola virus

Ebola virus

Transmission path: Smear infection

Ebola can be transmitted by animals and between people. It causes the deadly Ebola fever.

Viruses – swine flu

Swine flu

Transmission path: Droplet and contact infection

The H1N1 virus can infect both humans and mammals. In 2009, over 500,000 people in 200 countries were infected within a matter of months.

Virus transmission and the correct protection against infections

Not all viruses are equally contagious. While some pathogens are only transmitted through intensive contact, others can be spread simply by physical proximity. In the case of infection paths that use air as the transmission medium, effective air filter concepts can be used to combat these pathogens. The quality of the room air and thus the air filtration have no influence on other sources of infection, such as contaminated food or water.

Virus transmission – droplet infection

Droplet infection

Viruses that colonize the respiratory tract and mucous membranes are mainly absorbed through the ambient air. When we sneeze, cough or speak, tiny droplets containing virus particles are released into the air. The tiniest droplets are suspended in the air for a long time and are inhaled by other people. Droplets >5μm sink relatively quickly and reach objects and surfaces from where they are then indirectly spread.

Virus transmission – contact or smear infection

Contact or smear infection

With contact and smear infections, the pathogens are transmitted by touch. Sick patients may also have viruses on the palms of their hands. If they shake hands with other people, the viruses are transmitted. Infection can also be indirectly transferred via objects such as door handles. Thorough hand washing is an effective way of preventing contact infections.

Virus protection – how to protect yourself and others against infections

Did you know: Which respiratory masks make sense and when?

In recent weeks, the topic has attracted a great deal of press media attention: Which respirators offer adequate protection against viruses? What is the difference between a mouth-nose protection and a filtering half mask? Do self-sewn "DIY or community masks" protect at all? Here you will find some first orientation:

Mask type DIY masks Mouth and nose protection Filtering half masks
Intended use Private use External protection Self-protection / Industrial safety
Medical device No Yes No
Testing and certification No Yes, DIN EN 14683:2019-6 Standard Yes, DIN EN 149:2001-10 Standard
Protective effect Usually not proven Protection against droplets of the carrier Protection of the carrier against solid and liquid Aerosols

This table is based on the guidelines of the German Federal Institute for Drugs and Medical Devices (BfArM) for the use of masks (available only in German language):

DIY Masks

DIY MasksWhile shopping or even walking you will meet more and more people who wear so-called "DIY masks" (also called community or daily-use masks). Most of them are sewn from simple cotton fabrics and therefore do not protect like a certified medical product. But they can help to prevent the carrier from touching his or her face as often and thus reduce the risk of a smear infection, e.g. via the hands.

Mouth and Nose Protection

Mouth and Nose ProtectionMouth and nose protection is known, for example, from the operating theatre as a surgical mask or from a treatment at the dentist, as it is mainly used for patient protection. Although this is a certified medical device according to DIN EN 14683, it does not offer sufficient protection against viruses. The mouth-nose protector is only suitable for reducing the risk of infection of other people when coughing or sneezing, if you yourself are already ill. Such a mask only protects the wearer against larger droplets. As the mouth-nose protection becomes soaked through with the duration of wearing it, it should be replaced after several hours.

Filtering Half Masks

Filtering Half MasksFiltering Face Piece (FFP) half masks cover the nose and mouth and protect against respirable dust, smoke and liquid mist. They are made of rubber or silicone and are supplemented by various filter materials. The use of these masks is mandatory at workplaces that exceed the threshold limit value (TLV) of substances hazardous to health. Protective masks of the classes FFP2 and FFP3 are also recommended for hospital staff, care workers and other groups of people with an increased risk of infection. In the case of direct contact with infected individuals, FFP3 respiratory masks offer the best protection against pathogens such as viruses and bacteria.

The protective function of respiratory masks is standardized throughout Europe according to DIN EN 149 and is divided into the protection classes FFP1, FFP2 and FFP3:

Class Protective function
FFP1 FFP1 respiratory masks should only be worn where only non-toxic dusts and respiratory irritants are expected. They are used up to 4 times the occupational exposure limit value and filter at least 80% of airborne particles >0.6 μm.
FFP2 FFP2 respiratory masks provide protection against solid and liquid aerosols and airborne infectious agents that are hazardous to health. They are used up to a 10-fold excess of the occupational exposure limit value and filter up to 94% of particles >0.6 μm from the air breathed. According to the common opinion of experts the minimum protection class against virus infections.
FFP3 FFP3 respiratory masks offer the highest possible protection against toxic and harmful aerosols and airborne infectious agents within the protection classes for masks of EN149. They are used up to a 30-fold excess of the workplace limit value and filter at least 99.5% of particles >0.6 μm from the air we breathe.

For all masks, a few notes on correct handling should be observed. The Federal Institute for Drugs and Medical Devices (BfArM) has compiled these in a list (available only in German language):

Freudenberg Filtration Technologies produces filter media suitable for the assembly of respiratory masks.

Our technical filter information contains further details on how to protect against germs and viruses.

Customer Information

Technical filter information for protection against viruses and germs

Customer Information

Cabin air filter protection guidelines against COVID-19 health threats

To download the selected files please leave us some information.

Just complete all required fields marked with (*). You will get a link to download the documents in a glance.

Comfort Download

Remembering you for future downloads. A further address-entry becomes unnecessary after confirming the link you get via email.

You will immediately receive a link via email after requesting the first download. By clicking on this link, your information will be saved as browser cookie solely on your device making a further data-entry unnecessary. You will be able to delete the cookie in the settings of your browser at any time. The feature can be deactivated by deleting the cookie.

How does it work?

Your information will only be saved as browser cookie on your device making a further data-entry unnecessary. You will be able to delete the cookie in the settings of your browser at any time.

Solutions for industrial air filtration reduce airborne viruses

Effective protection for hazardous areas

Indoors, air filtration helps to minimize the risk of pathogens such as viruses and bacteria. Therefore, high-quality, individually adapted air filtration systems are recommended, especially for sensitive areas.

Learn more

Air filtration in the food & beverage industry

Food & Beverage industry

e.g. dairy products, meat processing industry, bakery products

Air filtration in clinics and hospitals

Clinics and hospitals

e.g. in isolation rooms, operating rooms, treatment rooms, corridors

Air filtration in schools and public buildings

Public buildings

e.g. schools, universities, sports halls, department stores, concert halls, etc.

Air filtration in public transport

Public transport

e.g. in buses, trains, ships and aircrafts

Spreading of viruses in buildings

The risk of infection is particularly high in public buildings and hospitals, as there are many people in confined spaces that can be potentially infectious. Here viruses can, for example, be taken up and passed on via door handles (contact infection). Droplets containing viruses can also be present in the air and enter the human body via the air we breathe (droplet infection).

In addition to the familiar hygiene measures such as frequent hand washing, keeping your distance or wearing a mouth protection, suitable air filter systems can effectively reduce the risk of infection indoors. Perfectly matched filter stages separate almost all particles from the air and thus protect against airborne viruses. In addition, the level of fresh air should be increased as much as possible to further reduce the pathogen concentration in the room air. In ventilation systems with recirculation operation, HEPA filters or high-efficiency fine filters should be used if they do not generate a differential pressure that is too high.

Air filters should be changed during normal maintenance intervals, i.e. when the pressure build-up or time restrictions make it necessary according to VDI 6022. Even in the current situation, air filters do not need to be changed more frequently or prematurely. When changing the filter, it is recommended to pack the removed filters airtight and dispose them at an incineration plant.

Learn more

Reducing virus infection risks with micronAir cabin air filters

Effective protection for vehicle passengers

Premium micronAir cabin air filters effectively reduce the infection risk of airborne viruses, thus offering reliable protection for vehicle passengers.

Learn more

Effective protection for vehicle passengers

Private vehicles

e.g. in cars

Spreading of viruses in vehicles

Viruses are capable of spreading inside vehicles as well. They reach vehicle interiors through infected people, for instance, and are spread when sneezing or coughing. Viruses remain infectious on surfaces such as the steering wheel, gear knob or seats for up to several days.

It is therefore particularly important to provide a sufficient amount of fresh air to the interior of vehicles in order to reduce the particle concentration and transport viruses out of the vehicle interior. Additionally, the ventilation system should include a high-efficient micronAir cabin air filter to effectively protect passengers against viruses. In the current global situation, cabin air filters should be changed more often than usual in order to continue to offer the highest filter performance and maximum virus protection.

Learn more

Do you need more technical filter information on handling airborne viruses?

Contact us